Full Width Front Bumper & Rear Bumper(19-24 Dodge Ram 2500) - ultralisk4x4
Full Width Front Bumper & Rear Bumper(19-24 Dodge Ram 2500) - ultralisk4x4
Name: Dodge Ram 2500 Full Width Front Bumper & Rear Bumper
Fitment: Fit for 2019-2024 Dodge Ram 2500 Models;
u6300 Dodge Ram 2500 Full-Width Front Bumper
- Not compatible with factory sensors
- 3-Piece modular design. Fits the vehicle body line perfectly.
- Bumper weight: about 149 lbs
- Heavy-duty structure enhanced protection
- Built-in winch plate that rated up to 12,000 pounds.
- Included 3/4 inch D-rings which can support up to 9,500 lbs. Rubber D-ring isolators are included.
- Spotlights included. Adequate lighting for safe driving.
- Heavy-duty steel construction: 11-gauge(1/8 inch) for the bumper body, 8-gauge(11/64 inch) steel for the winch plate and mounting parts
- Textured black powder coat finish & Premium E-coating process for corrosion protection under normal use
- Simple bolt-on installation. No drilling is required.
u6304 Dodge Ram 2500 Rear Bumper
- Bumper weight: about 78 lbs
- 3-piece modular design
- Provides adequate rear-end protection while driving through rugged trails
- Integrated steps on either side for easy bed access
- Equipped with a license plate light
- Comes with 2*18W LED flush mount floodlights; Retain OEM receiver hitch and wiring locations
- Heavy-duty steel construction: 11-gauge(1/8 inch) for the bumper body, 8-gauge(11/64 inch) steel for the mounting plate
- Textured black powder coat finish & Premium E-coating process for corrosion protection under normal use
- Direct bolt-on installation. No drilling is required.
Full-Width Front Bumper Package Included
- 1 x Dodge Ram Full-Width Front Bumper
- 2 x Mounting Plates
- 1 x Winch Plate
- 2 x D-Rings
- Mounting Brackets & Hardware
Rear Bumper Package Package Included
- 1 x Dodge Ram Rear Bumper with LED Floodlights
- 1 x License Plate Light
- 2 x Floodlights
- Mounting Hardware Kit
- Installation Instruction
Dimension. (Manual Measure. It is a little bit of different. Just for Reference Only.)
Full-Width Front Bumper
Rear Bumper
Share
As far as the product goes it scores a three. When I receive the product, unpackaged, and began assembling the front bumper everything was perfect. When I unboxed and began assembling the rear bumper the packaging was missing 8 nuts that were not even called out on the instructions to be used to assemble the bumper. The instructions were written as if the bumper came with threaded holes to put the bolts in. So I had to go buy 8 nuts in order to assemble the three pieces of the bumper. Then I also noticed when attempting to install wiring and license plate lights the holes in the bumper were square for the license plate lights. The license plate lights on a 2019 to 2022 ram 2500 are rectangled. If you do not want to cut the rear bumper to use the factory lights you must buy aftermarket lights that are not indicated as required in any literature that comes with the bumper or description on ultralisk web site. Also when installing the trailer plug I had to file the opening in order to get it to fit. The other thing that was a pain in the butt as far as the rear bumper goes is that there were no bracketing attached to the bumper for tying the wiring harness to. Now that assembly of both the front and rear bumper were complete installation began. Installation of the rear bumper was perfect. Installation of the front bumper on the other hand required some filing of mounting holes on the bumper to get it perfectly centered. After all of that they do fit the contour of the truck excellently and look very good on the vehicle.
After all of that Ultralisk 4X4 deserves six stars. I contacted them by email several times about the issues I was having and ultralisk always responded in a timely manner and did everything they could to make it right. Including refunding me $40 for the cost of the aftermarket license plate lights. I would definitely do business with ultralisk 4x4 in the future.